Curved Stainless Steel Car Exhaust Tail Throat with 63mm Inlet

This exhaust tail throat is a replacement outlet section for cars, made from stainless steel and shaped with a roasted blue bend and oblique mouth. It is intended for vehicles with a 1.5-2.2 displacement and a tail throat shape that suits curved car models. The key measurement is the interface: the inner diameter is 63mm, and it can be used when the outer diameter of the car exhaust pipe is less than 58mm. The stated suitable exhaust pipe diameter range is 5.3-3.8 cm, excluding small size models. Because it is a universal tail throat rather than a model-specific part, the buyer checks the existing exhaust pipe dimensions before ordering. The curved section is useful when a straight outlet does not sit correctly, and the stainless steel material is appropriate for an exterior exhaust component.

Features and Construction

The construction details that matter most here are the material, the bend, and the interface size. Each of these affects whether the tail throat suits a given car and how it sits at the rear of the exhaust.

Material and Build

The tail throat is made from stainless steel, as stated in the product information. This is the material used for the visible outer section and the interface that meets the car's exhaust pipe. Stainless steel is a practical choice for an exterior exhaust part because it is the stated material and is suited to the rear of a vehicle. The item weighs 320g, which gives a clear indication of its size and substance without implying anything beyond the source data. The roasted blue bend and oblique mouth are part of the finish and shape, giving the outlet a distinct appearance rather than a plain straight cut. No other materials or coatings are stated.

Size and Practical Fit

The most important measurement is the inner diameter of the tail throat interface at 63mm. The product information states that it can be used if the outer diameter of the automobile exhaust pipe is less than 58mm. The suitable exhaust pipe diameter range is given as 5.3-3.8 cm, with small size models excluded. This means the buyer should measure the car's existing exhaust pipe before ordering and compare it with these figures. The curved design is intended for car models where the exhaust requires a bend rather than a straight section. If the exhaust pipe is straight, the buyer can choose a straight or curved section; the curved section is available as an option. The tail throat is also described as suitable for 1.5-2.2 displacement tail throat shapes, which gives a further indication of the vehicles it is meant to suit.

Uses and Placement

This tail throat is designed for the rear exhaust outlet of a car. It can be used when replacing an existing tail throat or when changing the outlet to a curved, roasted blue section.

Event or Professional Use

For modified car projects, the tail throat provides a stainless steel outlet with a 63mm interface that can be matched to an exhaust pipe under 58mm outer diameter. The curved bend and oblique mouth give a defined shape at the rear of the vehicle. Because the part is universal, it is not tied to one make or model, but the displacement range of 1.5-2.2 and the pipe diameter limits should be checked first. This makes it relevant for build projects where the exhaust outlet needs to be replaced or adjusted. The 320g weight and carton packaging also make it straightforward to handle and store before fitting.

Everyday Home Use

For everyday car maintenance, this tail throat can replace a worn or damaged outlet section, provided the exhaust pipe outer diameter is less than 58mm and the vehicle falls within the stated displacement range. The stainless steel material is suited to the exterior of the car, and the curved shape can be chosen when the existing pipe is straight or when a curved section is preferred. The buyer selects colour option A or B, so the finish can be matched to the vehicle's appearance. Because the fit depends on the car's own pipe dimensions, measuring the exhaust before ordering is the main practical step. No specialist tools or procedures are stated in the source information.

Benefits and Buying Value

The value of this tail throat comes from its stated material, its measurable interface size, and its universal intent. It offers a way to replace or alter the exhaust outlet without relying on a model-specific part.

Reuse and Low Maintenance

The stainless steel construction is the stated material for this exhaust tail throat, and it is appropriate for an exterior car component. The product information does not give specific care instructions, so maintenance should be kept to basic external cleaning as with any exterior exhaust part. The 320g weight and simple one-piece form mean there are no stated moving parts or extra components to maintain. Because the item is a universal tail throat, it can be considered for more than one vehicle as long as the exhaust pipe diameter and displacement requirements are met. This supports a practical, low-complexity approach to replacing the outlet section.

Why Choose This Product

This tail throat is a suitable choice when the car has a 1.5-2.2 displacement and the exhaust pipe outer diameter is less than 58mm. The 63mm inner diameter at the interface is the key figure for matching it to the vehicle. The curved roasted blue bend and oblique mouth provide a specific shape and finish, while the stainless steel material is stated for the part. The universal fitment means it is intended for most models within the stated diameter range, excluding small sizes. Buyers who measure their exhaust pipe first can determine whether the straight or curved option is appropriate. The item is supplied in a carton and weighs 320g, with colour option A or B available.