Electric Trimming Machine 620W 28000RPM 6.35mm Collet Router for Wood Chamfering and Metal Trimming with Carbide Fillet Knife 19.48mm Diameter 220V AC
Electric Trimming Machine 620W 28000RPM 6.35mm Collet Router for Wood Chamfering and Metal Trimming with Carbide Fillet Knife 19.48mm Diameter 220V AC
620W Electric Trimming Machine with 6.35mm Collet and Carbide Fillet Knife
This electric trimming machine is a mains-powered tool for edge work, chamfering and light routing on wood-based panels and metal. It runs on 220 V AC single-phase power through a 1.2 m cord, and its 620 W motor turns at a rated 28,000 rpm and a no-load speed of 30,000 rpm. The 6.35 mm collet takes 1/4-inch shank tooling, and the supplied carbide fillet knife is intended for cutting materials such as MDF, solid wood and particle board. The package also includes trimmer and straight guide assemblies for guided work, two wrenches, a mounting knob, screw, mounting accessory and an English user manual.
Features and Construction
The machine is built around a 620 W motor and a 6.35 mm collet system. Its rated speed of 28,000 rpm and no-load speed of 30,000 rpm suit trimming and chamfering where controlled rotation matters. The 0.614 mm clamping cylinder secures the cutter in the collet, and the body weighs 1.4 kg without the cable.
Material and Build
The supplied fillet knife is made from carbide, a material suited to cutting abrasive sheet goods such as MDF and particle board. The machine and its guide assemblies are supplied as metal components, with the main body weighing 1.4 kg without the cable. The 6.35 mm collet handle matches 1/4-inch shank tooling, and the 0.614 mm clamping cylinder is part of the cutter retention assembly. Electrical supply is 220 V AC single-phase through a 1.2 m power cord.
Size and Practical Fit
The fillet knife measures 19.48 mm in diameter with a 3.17 mm radius, 3.17 mm cutting width and 7.00 mm cutting thickness. These dimensions suit fine edge work and chamfering rather than heavy stock removal. The 6.35 mm collet accepts 1/4-inch shank bits, and the 1.4 kg body weight without cable makes the machine manageable for bench work. The 1.2 m cord gives limited reach from the socket, so a nearby mains outlet is needed.
Uses and Placement
The machine is intended for metal trimming and wood chamfering, and it is suitable for MDF, solid wood and particle board. It can be used with the trimmer guide assembly or straight guide assembly depending on the cut, and the mounting knob, screw and mounting accessory are included for setup.
Event or Professional Use
In a workshop setting, the 620 W motor and 30,000 rpm no-load speed support repetitive trimming and chamfering on MDF, solid wood, particle board and metal. The trimmer guide assembly and straight guide assembly allow guided cuts, while the two supplied wrenches are used for changing the cutter. The 220 V AC supply and 1.2 m cord suit bench or site work where mains power is available.
Everyday Home Use
For home projects, the machine can be used for chamfering wooden edges and trimming metal where a 6.35 mm collet and 1/4-inch shank tooling are suitable. The 1.4 kg body weight without cable is manageable for short tasks, and the included straight guide assembly helps keep cuts aligned. The manual notes that necessary personal protective measures should be taken, and the tool should be kept out of the reach of children.
Benefits and Buying Value
The main practical value is the combination of a 620 W motor, 28,000 rpm rated speed and 30,000 rpm no-load speed in a 1.4 kg body, with a 6.35 mm collet that accepts 1/4-inch shank tooling. The supplied carbide fillet knife and guide assemblies cover trimming and chamfering tasks on common board materials.
Reuse and Low Maintenance
The carbide fillet knife is intended for cutting abrasive MDF and particle board, and it can be removed and refitted using the two supplied wrenches. The guide assemblies, mounting knob, screw and mounting accessory are reusable parts of the setup. No specific maintenance schedule is given in the source text, so users should follow the English user manual for care and storage guidance.
Why Choose This Product
This trimming machine is defined by its 6.35 mm collet, 620 W motor, 28,000 rpm rated speed and 30,000 rpm no-load speed. It comes with a carbide fillet knife measuring 19.48 mm in diameter, plus trimmer and straight guide assemblies for guided work. The 1.4 kg body weight without cable and 1.2 m power cord make it a mains-dependent tool for bench use. It is suitable for MDF, solid wood, particle board, metal trimming and wood chamfering.
